300-710 Exam Questions Dumps, Selling Cisco Products
300-710 Cert Guide PDF 100% Cover Real Exam Questions
Cisco 300-710 certification exam covers various topics related to Cisco Firepower NGFW, including configuring and managing NGFW policies, network access control policies, URL filtering, and advanced malware protection. 300-710 exam also tests the candidate's knowledge of network security concepts, such as intrusion prevention systems (IPS), secure sockets layer/transport layer security (SSL/TLS) decryption, and virtual private networks (VPNs). Passing the Cisco 300-710 exam demonstrates that the candidate has the necessary skills and knowledge to implement and manage Cisco Firepower NGFW, which is a critical component in protecting an organization's network infrastructure from cyber threats.
NEW QUESTION # 147
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
- A. bridge group member
- B. subinterface
- C. bridge virtual
- D. switch virtual
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transp
NEW QUESTION # 148
A network administrator is trying to convert from LDAP to LDAPS for VPN user authentication on a Cisco FTD. Which action must be taken on the Cisco FTD objects to accomplish this task?
- A. Create a Certificate Enrollment object to get the LDAPS certificate needed.
- B. Identify the LDAPS cipher suite and use a Cipher Suite List object to define the Cisco FTD connection requirements.
- C. Modify the Policy List object to define the session requirements for LDAPS.
- D. Add a Key Chain object to acquire the LDAPS certificate.
Answer: A
NEW QUESTION # 149
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
- A. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
- B. reputation-based objects, such as URL categories
- C. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
- D. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
- E. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
Answer: A,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html#ID-2243-00000414
NEW QUESTION # 150
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 151
An engineer wants to perform a packet capture on the Cisco FTD to confirm that the host using IP address 192 168.100.100 has the MAC address of 0042 7734.103 to help troubleshoot a connectivity issue What is the correct tcpdump command syntax to ensure that the MAC address appears in the packet capture output?
- A. -nm src 192.168.100.100
- B. -w capture.pcap -s 1518 host 192.168.100.100 ether
- C. -w capture.pcap -s 1518 host 192.168.100.100 mac
- D. -ne src 192.168.100.100
Answer: D
NEW QUESTION # 152
An engineer configures an access control rule that deploys file policy configurations to security zone or tunnel zones, and it causes the device to restart. What is the reason for the restart?
- A. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.
- B. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.
- C. Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.
- D. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/policy_management.html
NEW QUESTION # 153
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. configure coredump packet-engine enable
- B. capture
- C. capture-traffic
- D. capture WORD
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/b_Command_Reference_for_Firepower_Threat_Defense/ac_1.html
NEW QUESTION # 154
An administrator is creating interface objects to better segment their network but is having trouble adding interfaces to the objects. What is the reason for this failure?
- A. The administrator is adding interfaces of multiple types.
- B. The interfaces are being used for NAT for multiple networks.
- C. The administrator is adding an interface that is in multiple zones.
- D. The interfaces belong to multiple interface groups.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusa
"All interfaces in an interface object must be of the same type: all inline, passive, switched, routed, or ASA FirePOWER. After you create an interface object, you cannot change the type of interfaces it contains."
NEW QUESTION # 155
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?
- A. The system rate-limits all traffic.
- B. The system repeatedly generates warnings.
- C. The rate-limiting rule is disabled.
- D. Matching traffic is not rate limited.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/quality_of_service_qos.pdf
NEW QUESTION # 156
An organization is setting up two new Cisco FTD devices to replace their current firewalls and cannot have any network downtime During the setup process, the synchronization between the two devices is failing What action is needed to resolve this issue?
- A. Confirm that both devices are configured with the same types of interfaces
- B. Confirm that both devices are running the same software version
- C. Confirm that both devices have the same flash memory sizes
- D. Confirm that both devices have the same port-channel numbering
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/ firepower_threat_defense_high_availability.html#Cisco_Reference.dita_cc8821d8-a5a5-49c0-97fddc9b6f7dbad2
NEW QUESTION # 157
Within Cisco Firepower Management Center, where does a user add or modify widgets?
- A. dashboard
- B. context explorer
- C. reporting
- D. summary tool
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html
NEW QUESTION # 158
An engineer must deploy a Cisco FTD appliance via Cisco FMC to span a network segment to detect malware and threats. When setting the Cisco FTD interface mode, which sequence of actions meets this requirement?
- A. Set to passive, and configure an access control policy with a prefilter policy defined
- B. Set to none, and configure an access control policy with a prefilter policy defined
- C. Set to none, and configure an access control policy with an intrusion policy and a file policy defined
- D. Set to passive, and configure an access control policy with an intrusion policy and a file policy defined
Answer: D
NEW QUESTION # 159
An engineer must investigate a connectivity issue and decides to use the packet capture feature on Cisco FTD. The goal is to see the real packet going through the Cisco FTD device and see the Snort detection actions as a part of the output. After the capture-traffic command is issued, only the packets are displayed. Which action resolves this issue?
- A. Use the capture command and specify the trace option to get the required information.
- B. Use the verbose option as a part of the capture-traffic command
- C. Specify the trace using the -T option after the capture-traffic command.
- D. Perform the trace within the Cisco FMC GUI instead of the Cisco FTD CLI.
Answer: B
NEW QUESTION # 160
A network administrator registered a new FTD to an existing FMC. The administrator cannot place the FTD in transparent mode. Which action enables transparent mode?
- A. Dereglster the FTD device from FMC and configure transparent mode via the CLI.
- B. Add a Bridge Group Interface to the FTD before transparent mode is configured.
- C. Assign an IP address to two physical interfaces.
- D. Obtain an FTD model that supports transparent mode.
Answer: A
NEW QUESTION # 161
In which two places can thresholding settings be configured? (Choose two.)
- A. per preprocessor, within the network analysis policy
- B. on each IPS rule
- C. globally, within the network analysis policy
- D. on each access control rule
- E. globally, per intrusion policy
Answer: B,E
Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-Global-Threshold.pdf
NEW QUESTION # 162
Which two deployment types support high availability? (Choose two.)
- A. virtual appliance in public cloud
- B. routed
- C. clustered
- D. intra-chassis multi-instance
- E. transparent
Answer: B,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION # 163
Which CLI command is used to control special handling of ClientHello messages?
- A. system support ssl-client-hello-enabled
- B. system support ssl-client-hello-display
- C. system support ssl-client-hello-tuning
- D. system support ssl-client-hello-force-reset
Answer: A
Explanation:
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/firepower_command_line_reference.html
NEW QUESTION # 164
A network administrator notices that SI events are not being updated The Cisco FTD device is unable to load all of the SI event entries and traffic is not being blocked as expected. What must be done to correct this issue?
- A. Manually update the SI event entries to that the appropriate traffic is blocked
- B. Replace the affected devices with devices that provide more memory
- C. Redeploy configurations to affected devices so that additional memory is allocated to the SI module
- D. Restart the affected devices in order to reset the configurations
Answer: A
NEW QUESTION # 165
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- B. Cisco Firepower automatically updates the policies.
- C. Cisco Firepower gives recommendations to update the policies.
- D. The administrator manually updates the policies.
Answer: C
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION # 166
Which two features of Cisco AMP for Endpoints allow for an uploaded file to be blocked? (Choose two.)
- A. application blocking
- B. exclusions
- C. simple custom detection
- D. application whitelisting
- E. file repository
Answer: A,C
NEW QUESTION # 167
Due to an Increase in malicious events, a security engineer must generate a threat report to include intrusion in events, malware events, and security intelligence events. How Is this information collected in a single report?
- A. Export the Attacks Risk report.
- B. Generate a malware report.
- C. Create a Custom report.
- D. Run the default Firepower report.
Answer: C
NEW QUESTION # 168
An administrator is creating interface objects to better segment their network but is having trouble adding interfaces to the objects. What is the reason for this failure?
- A. The interfaces are being used for NAT for multiple networks.
- B. The interfaces belong to multiple interface groups.
- C. The administrator is adding interfaces of multiple types.
- D. The administrator is adding an interface that is in multiple zones.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html#ID-2243-000009b4
"All interfaces in an interface object must be of the same type: all inline, passive, switched, routed, or ASA FirePOWER. After you create an interface object, you cannot change the type of interfaces it contains."
NEW QUESTION # 169
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
- A. Connectivity Over Security
- B. Maximum Detection
- C. Balanced Security and Connectivity
- D. Security Over Connectivity
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html
NEW QUESTION # 170
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-4096
- B. SHA-1024
- C. SHA-512
- D. SHA-256
Answer: D
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/cisco_threat_intelligence_director__tid_.html
NEW QUESTION # 171
......
Pass 300-710 Exam - Real Questions and Answers: https://prepaway.testkingpdf.com/300-710-testking-pdf-torrent.html
