Updated PDF (New 2024) Actual Juniper JN0-636 Exam Questions
Verified JN0-636 Exam Dumps PDF [2024] Access using PrepAway
Juniper JN0-636 certification exam is a valuable credential for security professionals looking to enhance their skills and knowledge in Juniper Networks security technologies. JN0-636 exam covers a broad range of topics and validates practical skills in implementing and managing advanced security technologies. Achieving this certification demonstrates a high level of expertise in Juniper Networks security solutions and opens up career opportunities in the security industry.
NEW QUESTION # 55
In Juniper ATP Cloud, what are two different actions available in a threat prevention policy to deal with an infected host? (Choose two.)
- A. Drop the connection silently.
- B. Quarantine the host.
- C. Send a custom message
- D. Close the connection.
Answer: A,B
NEW QUESTION # 56
Exhibit
You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.)
- A.
- B.
- C.
- D.
Answer: C,D
NEW QUESTION # 57
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?
- A. The number of classifiers configured for the VPN.
- B. The number of CoS queues configured for the VPN.
- C. The number of traffic selectors configured for the VPN.
- D. The number of forwarding classes configured for the VPN.
Answer: C
NEW QUESTION # 58
Which two modes are supported on Juniper ATP Cloud? (Choose two.)
- A. transparent mode
- B. Layer 3 mode
- C. global mode
- D. private mode
Answer: A,B
NEW QUESTION # 59
You are using traceoptions to verify NAT session information on your SRX Series device.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the last packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the first packet in the session.
Answer: A,C
NEW QUESTION # 60
SRX Series device enrollment with Policy Enforcer fails To debug further, the user issues the following commandshow configuration services security-intelligence url
https : //cloudfeeds . argon . juniperaecurity . net/api/manifeat. xml
and receives the following output:
What is the problem in this scenario?
- A. The SRX Series device does not have a valid license.
- B. The device is directly enrolled with Juniper ATP Cloud.
- C. Junos Space does not have matching schema based on the
- D. The device is already enrolled with Policy Enforcer.
Answer: A
NEW QUESTION # 61
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the last packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the first packet in the session.
Answer: A,C
NEW QUESTION # 62
You want to enforce I DP policies on HTTP traffic.
In this scenario, which two actions must be performed on your SRX Series device? (Choose two )
- A. Disable screen options on the Untrust zone.
- B. Choose an attacks type in the predefined-attacks-group HTTP-All.
- C. Specify an action of None.
- D. Match on application junos-http.
Answer: B,D
Explanation:
To enforce IDP policies on HTTP traffic on an SRX Series device, the following actions must be performed:
Choose an attacks type in the predefined-attacks-group HTTP-All: This allows the SRX Series device to match on specific types of attacks that can occur within HTTP traffic. For example, it can match on SQL injection or cross-site scripting (XSS) attacks.
Match on application junos-http: This allows the SRX Series device to match on HTTP traffic specifically, as opposed to other types of traffic. It is necessary to properly identify the traffic that needs to be protected.
Disabling screen options on the Untrust zone and specifying an action of None are not necessary to enforce IDP policies on HTTP traffic. The first one is a feature used to prevent certain types of attacks, the second one is used to take no action in case of a match.
NEW QUESTION # 63
While troubleshooting security policies, you added the count action.
Where do you see the result of this action?
- A. In the show security policies hit-count command output.
- B. In the show firewall log command output.
- C. In the show security flow statistics command output.
- D. In the show security policies detail command output.
Answer: B
NEW QUESTION # 64
Your manager asks you to show which attacks have been detected on your SRX Series device using the IPS feature.
Which command would you use to accomplish this task?
- A. show security idp attack detail
- B. show security idp attack table
- C. show security idp memory
- D. show security idp counters
Answer: B
NEW QUESTION # 65
Exhibit
Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.
Referring to the exhibit, which two actions solve this problem? (Choose two)
- A. Identify two neutral IPv4 address spaces for address translation.
- B. Configure IPsec Transport mode.
- C. Configure static NAT on the SRX Series devices.
- D. Connect the competitor network using IPsec policy-based VPNs.
Answer: C,D
NEW QUESTION # 66
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The custom infected hosts feed will overwrite the Sky ATP infected host's feed.
- B. Juniper Networks will not investigate false positives generated by this custom feed.
- C. The custom infected hosts feed will not overwrite the Sky ATP infected host's feed.
- D. Juniper Networks will investigate false positives generated by this custom feed.
Answer: A,B
Explanation:
https://www.juniper.net/documentation/en_US/junos-space18.1/policy-enforcer/topics/task/configuration/junos-space-policyenforcer-custom-feeds-infected-host-configure.html
NEW QUESTION # 67
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- B. Full mesh IPsec VPNs with tunnels between all sites.
- C. An IPsec group VPN with the corporate firewall acting as the hub device.
- D. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
Answer: C
Explanation:
https://www.juniper.net/us/en/local/pdf/app-notes/3500202-en.pdf
NEW QUESTION # 68
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- B. Full mesh IPsec VPNs with tunnels between all sites.
- C. An IPsec group VPN with the corporate firewall acting as the hub device.
- D. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
Answer: C
NEW QUESTION # 69
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet originated within the Trust zone.
- B. The packet is allowed to make an SSH connection.
- C. The packet's destination is to a server in the DMZ zone.
- D. The packet's destination is to an interface on the SRX Series device.
- E. The packet is dropped before making an SSH connection.
Answer: A,D,E
NEW QUESTION # 70
......
Juniper JN0-636 certification exam is a professional-level certification exam that focuses on security. JN0-636 exam is designed for individuals who have a strong understanding of Junos security and are looking to further their knowledge and skills in this area. JN0-636 exam consists of multiple-choice questions, along with hands-on lab simulations, which test the candidate's ability to configure and troubleshoot Junos security features.
Try Best JN0-636 Exam Questions from Training Expert PrepAway: https://prepaway.testkingpdf.com/JN0-636-testking-pdf-torrent.html
