Real SAP C_THR92_2105 Exam Questions [Updated 2022]
C_THR92_2105 Exam Dumps Pass with Updated 2022 SAP Certified Application Associate - SAP SuccessFactors People Analytics Embedded Edition 3H/2021
NEW QUESTION 38
You want to create a report that shows onerow per employee, that includes the total number of previous employers for each employee.
Which tool must you use?
- A. Runtime Filters
- B. Date Options
- C. Aggregated Calculated Columns
- D. Calculated Columns
Answer: D
NEW QUESTION 39
How do you configure the Builder to display the chart in the screenshot in a story report?
Note: There are 3 correct answers to this question.
- A. Set Dimensions to Pay Grade
- B. Set Color to Gender
- C. Set Measures to EOP Headcount
- D. Set Dimensions to Gender
- E. Set Color to Pay Grade
Answer: A,B,D
NEW QUESTION 40
In a live data query, what are user-prompted filter types?
Note: There are 2 correct answers to this question.
- A. People Scope
- B. Filter Groups
- C. Runtime
- D. Dynamic
Answer: A,B
NEW QUESTION 41
You are using a pivot table in your canvas report but the report does NOT display the most recent data.
Whatcould be the reason?
- A. You are using a query with a static date filter.
- B. You are NOT using a template.
- C. You are using the percent of total option.
- D. You are using a wrong People Scope.
Answer: A
NEW QUESTION 42
You want to create a query that shows only the current Job Information data for each employee.
On the Job Information table, which date type configurations can you use?
Note: There are 2 correct answers to this question.
- A. Show All
- B. As of Date with a dynamic date value of Today
- C. Current Date
- D. Date Range (On Start Date) with a date range from Today to Today
Answer: C,D
NEW QUESTION 43
You are creating a Story report on Job Classifications. You have configured the chart, table, and input control on the canvas as displayed in the screenshot.
How do you set the input control?
- A. Create the corresponding filter on each chart.
- B. Configure it for Linked Analysis.
- C. Enable Cascading Effects.
- D. Convert it to a Story Filter.
Answer: A
NEW QUESTION 44
Which tool can you useto create tiles offline?
- A. Advance Reporting
- B. Detailed Reporting
- C. YouCalc Designer
- D. Query Workspace
Answer: C
NEW QUESTION 45
The drill-down list of a tile contains more entries than the values displayed in a chart (see attached image).
How do you make the outputs match?
- A. Remove the category assignment field.
- B. Remove the column that wouldgenerate multiple entries per metric.
- C. Change the metric calculation from Count to Count distinct.
- D. Configure a filter to remove the duplicate column.
Answer: D
NEW QUESTION 46
When you format a list reportcomponent, which actions can you perform?
Note: There are 3 correct answers to this question.
- A. Adjust column widths.
- B. Change column types.
- C. Change the order of columns.
- D. Change column headers.
- E. Save formats to a template.
Answer: A,C,D
NEW QUESTION 47
A report shows one row for each language an employee speaks. The employee information "First name" and "Last name" is repeated for each language on each row.
Which format option allows you to display the employee information "First name" and "Last name" only once for each employee?
- A. Sum Function
- B. Show Total Row
- C. Column Style Settings
- D. Group Columns
Answer: D
NEW QUESTION 48
You are using Report Center to share a canvas report. You share the report with a Dynamic Group (see attached image).
Who is the report shared with?
- A. Employees of the Sales departments and all employees of Atlanta
- B. Employees of the Sales department
- C. Employees of Atlanta
- D. Employees of the Sales department of Atlanta
Answer: D
NEW QUESTION 49
You are creating a query that lists employee information such as name, address, and dependent information. The query uses Personal Information as the driving table and joins the Dependents and Address tables. You notice many employees are missing from the result set.
What are the reasons?
- A. Personal Information is joined to Address table with a left join and the Address table is joined to the Dependents table with a left join.
- B. Personal Information is joined to Dependents table with a left join and the Dependents table is joined to the Address table with a left join.
- C. Personal Information is joined to both the Dependents table and the Address table with a left join.
- D. Personal Information is joined to both the Dependents table and the Address table with an inner join.
Answer: D
NEW QUESTION 50
You want to create a report thatreturns only employees who were born in 1961. You also want to enable the person who runs the report to specify a different birth year.
How can you achieve this?
Note: There are 2 correct answers to this question.
- A. 1. Select Date Options from the Toolbar.
2. Set Date Type to Show All.
3. Select Manage Run Time Filters from the Toolbar.
4. Expand Personal Information table.
5. Select Date of Birth column.
6. Select OK. - B. 1. Select Date Options from the Toolbar.
2. Set Date Type to Date Range (On Start Date).
3. Set From date to 1/1/1961 and To date to 12/31/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Set Selectable At Runtime. - C. 1. Select Date Options from the Toolbar.
2. Set Date Type to As of Date.
3. Set As of Date to 1/1/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Select Date of Birth from End Date Column.
7. Set Selectable At Runtime. - D. 1. Select Manage Query Filters.
2. Expand Personal Information table and select Dateof Birth.
3. Select Greater than or equal to from the operator list.
4. Set Custom filter date to 1/1/1961.
5. Select OK and then select Add.
6. Expand Personal Information table and select Date of Birth.
7. Select less than or equal to from the operator list.
8. Set Custom filter date to 12/31/1961.
9. Select OK.
Answer: B,D
NEW QUESTION 51
What are the steps to create and assign a date filter to a tile?
- A. 1. Access Date Options.
2. Configure the date type to Date Range.
3. Configure the date from/date to.
4. Enable the date filter in the tile.
5. Configure enduser free selection of date range. - B. 1. Enable the date filter in the tile.
2. Create a new date range.
3. Configure the Name, label and date from/date to.
4. Configure end user free selection of date range. - C. 1. Create a new date range.
2. Configure the Name, label and date from/date to.
3. Enable the date filter in the tile.
4. Configure end user free selection of date range. - D. 1. Enable the date filter in the tile.
2. Access Date Options.
3. Configure date type to Date Range.
4. Configure the date from/date to.
5. Configure end user free selection of date range.
Answer: A
NEW QUESTION 52
Which of the following would make it possiblefor a filter to update multiple charts using linked analysis?
Note: There are 2 correct answers to this question.
- A. The charts should have the same data source.
- B. The chart should use the same aggregation.
- C. The data sources for the charts should contain linked dimensions.
- D. The charts should usethe same measures.
Answer: C,D
NEW QUESTION 53
A report shows one row for each language an employee speaks. The employee information "Firstname" and
"Last name" is repeated for each language on each row.
Which format option allows you to display the employee information "First name" and "Last name" only once for each employee?
- A. Sum Function
- B. Show Total Row
- C. Column Style Settings
- D. Group Columns
Answer: D
NEW QUESTION 54
You are configuring a story report. You add the image widget to the top-left corner of the canvas. You then upload the SuccessFactors logo in the Builder and select the logo image so it displays on the canvas. When you preview the report in View Mode, the logo appears centered on the canvas.
What action do you take so the Logo appears in the top-left corner when viewing the report in view mode?
- A. In Designer Mode, add another widget under the image.
- B. In Styling for the page, set the Page Size to Fixed.
- C. In Styling for the image, set the Image Properties to Pan.
- D. In Builder for the image, set the image to Dynamic.
Answer: A
NEW QUESTION 55
In addition to any chart filter you may have applied to your chart, which other filters may be affecting the chart filter, due to the Cascading effect?
Note: There are 2 correct answers to this question.
- A. Query
- B. Story
- C. Page
- D. Table
Answer: A,B
NEW QUESTION 56
What functionality can be used in a calculated column? Note: There are 2 correct answers to this question.
- A. If/Then/Else statement
- B. Data type conversion
- C. Average
- D. Concatenation
Answer: A,D
NEW QUESTION 57
While constructing a dashboard, youfind that you need to create a tile that requires more complex configuration than what is available with the Online Tile Builder tool.
What tool can you use to create this tile?
- A. Business Intelligence Reporting Tool (BIRT)
- B. LMS Report Designer
- C. PDFSam
- D. YouCalc designer
Answer: D
NEW QUESTION 58
You want to build a query for a cross-domain report.
What does the system do with fields that are NOT available for this report?
- A. Unavailable fields are hidden.
- B. Unavailable fields are marked red.
- C. Unavailable fields are moved to the bottom of the list.
- D. Unavailable fields are marked gray.
Answer: D
NEW QUESTION 59
In the Advanced Reporting tool, you want to create a query where the results meet the following criteria
* Only show one row per employee,
* Only show the pay components Base Salary and Bonus,
* Show these pay components as individual columns.
You have joined the Global Job Information table with the Compensation table.What else must you do?
Note: There are 2 correct answers to this question.
- A. Change the table join to the Compensation table to an inner join.
- B. Configure a table restriction of the Compensation table.
- C. Configure a table restriction of the Global Job Information table.
- D. Duplicate the Compensation table.
Answer: B,C
NEW QUESTION 60
As a report owner, you want to share a table report with a user.
What must you configure to ensure the user can access data?
Note: There are 2 correct answers to this question.
- A. Report creation People step
- B. Reports Permission: Create Report
- C. Reports Permission: Run Report
- D. Report creation User Prompted Filters step
Answer: B,C
NEW QUESTION 61
Which actions can you permit the report consumer to perform by your configuration of Interactive widgets?
Note: There are 3 correct answers to this question.
- A. Switch between edit and view mode.
- B. Show/hide labels.
- C. Add/delete widgets.
- D. Adjust filters within controls.
- E. Freeze table rows/columns.
Answer: B,D,E
NEW QUESTION 62
......
SAP C_THR92_2105 Exam Description:
The "SAP Certified Application Associate - SAP SuccessFactors People Analytics: Reporting 1H/2021" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP SuccessFactors People Analytics: Reporting solution. This certificate proves that the candidate has a basic and overall understanding within this consultant profile of the industry solution, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP SuccessFactors People Analytics: Reporting.
C_THR92_2105 Exam Dumps, C_THR92_2105 Practice Test Questions: https://prepaway.testkingpdf.com/C_THR92_2105-testking-pdf-torrent.html
